Stippled Metal Art
First Cut

Stippled Metal Art

Hey, Curio users! Have you tried metal stippling yet? This is a piece of stippled metal art I made for my Valentine’s Day décor. Shall we find out how to use the Silhouette Curio™ to stipple on metal? Let’s do it!


Supplies and Tools needed for this project:


Stipple materials and tools



Step One: Convert to Stipple Design


First, select a design for stippling. I chose two shapes from the design store, but because they are different types of files, I had to apply the stippling effect in two different ways.

The rose is an image originally intended for print & cut. I removed the outer cut line and used Stipple Trace to assign a stipple effect to the image. The Stipple Trace function is for images that are not composed of cut lines.

  • Select Stipple Trace in the Stipple Window
  • Click on Select Stipple Area and drag a box around the image
  • Choose a Stipple Style (I went with Regular – 6 on this one—what looks best will vary by design)
  • Fine tune the settings (I almost always use Density 100, Refinement 4, Grid Spacing 0.020)
  • Click Create Stipple

SS Stipple Trace 2



Now drag away the original image so you’re only left with the stipple design.

SS Stipple Trace 3



The word “love” is a cut file, so I applied a Stipple Edge. I reduced the spacing to 0.073 inches, but you can use whatever spacing looks good to you.

SS Stipple Edge



Step Two: Prepare Layout


Now that we have our stipple design, next we need to get the design ready for the metal stippling sheet.


Place the two parts of the design so they look nice in relation to each other. (Group together, if you wish.) Set your Page Size to match the 5 x 7” metal stippling sheet in the Design Page Window. (Reduce the size of your design to fit, if necessary, by dragging a corner handle.)

SS Set Document Size 7x5



Because you’re stippling on the entire sheet, a quick way to center the design on the sheet is to use the Align Window and select Center to Page. (Be sure to select the full design first.)

SS Center Design on 7x5 Metal Sheet



Step Three: Prepare to Cut/Stipple


It’s almost time to send the design to the Curio. Go to the Cut Settings Window and choose Metal Stippling Sheets for the Material Type under Tool 1.

This tells you to use your Stippling Tool in tool holder 1 (the left/red side) and has you use Platforms 2, 1, and the Embossing Curio mat. (If you use the cut mat it won’t imprint as deeply.) You can leave the rest of the settings at their default, and perhaps check the box for a Double Cut. (I sent my design through a second time for a slightly stronger stipple effect, which has the same result as a double cut.)

SS stipple cut settings 2



Step Four: Load the Material and Cut

Be sure to place your metal sheet on the embossing mat as shown on your screen (use the tiny corner arrows as a guide to leave a border of the mat around the metal sheet). I also like to use the clear Curio material fasteners whenever I use the embossing mat.

Ready to stipple on metal sheet - emboss mat with material fasteners



Load the base into the Curio and select Send to Silhouette. Watch it stipple (it may take a while, depending on the complexity of your chosen design), then remove and frame as desired.

Stippled metal rose

Stippled metal art 2 by Kelly Wayment


I hope this project inspires you to give metal stippling a try!

Kelly Wayment

Hi! I'm Kelly Wayment and have loved working with Silhouette America on their design team since 2013 and contributing to their YouTube videos since 2017. I live in Utah with my husband and four kids. The Silhouette machine has literally changed the course of my life as it has turned my simple hobbies into ways to push the boundaries with my creativity, along with innumerable opportunities to teach and share that joy with others. You can find my blog at

Designs Used:

Products Used:

Silhouette Curio™

Stippling & Etching tool

Metal Stippling Sheets


Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.


  1. Really cool. Thanks!

  2. Thanks for the tutorial! Such a pretty Valentine’s Day decoration 🙂

  3. This is so pretty! I’m impressed with how much detail transferred to the stippled rose. Great tutorial Kelly!

    1. Thanks, Analisa! 🙂

Comments are closed.