Sketched Winter Card
First Cut

Sketched Winter Card

Hello, Silhouette fans!On this project, I made a  simple sketched winter card. We have several winter birthdays in our family, and I think this design is great for cards.


I sketched the tree with its snowflakes and a sentiment on vellum, added color to the back with marker, then added another sketchy-looking border to my green pattern paper before cutting it as well.


The tree design is resized here to approximately 3.64” W x 4.05” H. I used my Text Tool to type out “Happy Birthday” in all caps with Jeana Sketch font. I created a rounded rectangle exactly 4.5” square with my rounded-rectangle drawing tool (hold Shift while dragging a red corner dot to alter the roundness of the corners). I created a 0.066” offset of the rounded rectangle and then changed its Line Style to a funky dashed line. Finally, I drew a 5” square for the card base with my rectangle drawing tool.


I put the sentiment and tree design on the smaller rounded rectangle to be sketched and cut from vellum, and I centered the larger dashed-line rounded rectangle on the square card base to be sketched and cut from pattern paper.


Once the designs were sketched and cut, I colored behind the tree on the back side of the vellum with a marker. (You can color directly on Silhouette-brand sketched designs with markers, but I wanted a softer look to be seen through the vellum.) I also added a few rhinestones to make my snowflakes sparkle.


Are you new to sketch pens? Read on…


You can sketch and cut in Silhouette Studio a couple of different ways. Both ways are set up in your Cut Settings Window. This process is assuming you are using one color of sketch pen that will sketch on a shape to subsequently be cut from paper. (It’s easy to sketch multiple colors once you know what you’re doing, but I won’t include that here.)


Method 1:

  • Set the Cut Mode to Standard. (See A in the image below.)
  • Select the design to be sketched (everything to be sketched should be grouped with each other, and everything to be cut should be grouped with each other—in my example there’s only one shape to be cut so grouping doesn’t apply). You won’t group the sketched part with the cut part.
  • With the sketch design selected, choose Cut for the Cut Style. Also select Silhouette Sketch Pen for the Material Type. (B)
  • Now select just the cut shape, and choose No Cut for the Cut Style. (The preview will show the sketch design in bold red and the cut design as a faded outline.) (C)


Sketch & Cut Method 1


  • Put your paper (or vellum, etc.) on the mat and load it into the machine.
  • Make sure your sketch pen is in the blade holder.
  • Choose Send to Silhouette.
  • When your Silhouette is done sketching, DO NOT UNLOAD THE MAT.
  • Instead, select your sketch shape and choose No Cut, then select your cut shape and choose Cut. (The preview will show the sketch design as a faded line color and the cut design in bold red.)
  • Change the Material Type to the type of paper you have just sketched on (vellum, pattern paper, etc.).
  • Remove the pen and put in the blade (at the correct setting for that material).
  • Choose Send to Silhouette.



Method 2:

  • Make sure everything to be sketched is one line color (black in my example) and that everything to be cut is a different line color (red in my example). It doesn’t matter how it’s grouped, so I usually group the whole thing so it’s easier to move around on the page.
  • Set the Cut Mode to Advanced. (See A in the image below.)
  • Set the Cut Order to Line Color. Your preview will show everything as a bold cut line, but in the different line colors you designated. (B)
  • Make sure the sketch portion’s line color in the Cut Order is above the cut portion’s line color so it will sketch before it cuts. (C)
  • Click on the colored box (or to the right of it) to select that line color’s Material Type. In this example, choose Silhouette Sketch Pen for the black sketch color and Vellum for the red cut color. (D)
  • Add a Pause between the sketch and the cut by right-clicking on the top line (black box) and then clicking Add Pause on the popup. Now your machine knows to wait after sketching so you can swap out the pen for the blade.


Sketch & Cut Method 2


  • Load your paper (or vellum, etc.) on the mat into the machine, make sure your sketch pen is in the blade holder, and choose Send to Silhouette.
  • The Silhouette will sketch its design and then freeze instead of returning to home base. On your cut screen it will tell you it’s paused. This is when you take out the pen and replace it with the correctly-set blade. Leave the mat alone.
  • After you’ve done that, click Resume Cutting. (Do NOT click Start.)


Pause and Resume Cut


The machine will now do the cut portion, and it’s finished!


If you haven’t used your sketch pens yet, or haven’t used them much, why don’t you give it a try with this week’s freebie? You can try out both methods above and see which way you like better.


Sketched Winter Tree Card detail



Kelly Wayment

Hi! I'm Kelly Wayment and have loved working with Silhouette America on their design team since 2013 and contributing to their YouTube videos since 2017. I live in Utah with my husband and four kids. The Silhouette machine has literally changed the course of my life as it has turned my simple hobbies into ways to push the boundaries with my creativity, along with innumerable opportunities to teach and share that joy with others. You can find my blog at

Designs Used:

Products Used:

New Silhouette CAMEO®


CAMEO Cutting Mat

sketch pen starter kit



Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.


  1. This is so cool! I didn’t know there were dashed lines available that look like this…can’t wait to try that out. AND I had no idea you could add a pause. So handy! Thanks so much for the info.

    1. You’re welcome! I love the pause button. 🙂

  2. So pretty!

  3. Very cute Kelly…love the rhinestones over the sketching!

  4. I love this! I love the clean lines, I love the touch of elegance and love your choice of colors. Funny thing is I was trying to figure out how I would use this design and now I’ve got ideas! Thank you for sharing!

    1. Glad you like it, Marilyn. Always nice to get others’ ideas on using a shape. 🙂

  5. I also never knew I’m able to add a pause, but now I do!

  6. I’m excited to try out the pause option too!

  7. Thanks for the great tutorial Kelly! Been hoping for more Version 3 instruction! Would love to see more blog posts exploring the Advanced and other new options in this version. 🙂
    Cute card too!! love the rhinestone touches!

    1. Thanks, Donna! The pause feature for sketching and changing cut depths is my favorite feature of version 3. What else would you like to know, and I’ll see if I can address it in future tutorials?

  8. Thanks for the sketch tutorial, will method 3
    work if you use a flashdrive instead of the direct hook up? I notice that when you use a flashdrive it makes you unload after each operation, I’m new to Silhouette Cameo.

    1. Annie, I’m not sure how it works with the new CAMEO that can run from a flash drive. I’m waiting for mine to arrive and will have to test out the pause feature. Sorry I don’t have a better answer for you.

  9. I was playing with this design today, trying to figure out how to use it. I decided to un group it all, change the line colors to blue snowflakes/starts, make the tree boughs green, and the trunk brown using my Portrait, and then print it out to use as a card or something. That worked pretty well also. 🙂 I will definitely have to try it on vellum, I love that look.

    1. “stars” LOL

    2. Sounds great, Sheryl! I’ll bet the added color is beautiful!

Comments are closed.