Free Shape Of The Week: Be In The Moment
First Cut

Free Shape Of The Week: Be In The Moment

Freeshape011215LO |Cari Locken for Silhouette copy



Are you all slowly getting back into the daily routine again? I think we are around here.  This time of year is always a great time to re-organize life, home, work, etc. but it’s also a great time to enjoy the winter season and all that is has to offer.


Today I’m sharing a layout using the FREE Shape of the Week. An adorable snowflake design with a base to create a card.  Instead I chose to use part of the design for a stamp and create a layout.


You will need:



Step One: Creating a Stamp


To begin, I gathered all of my stamping supplies.



mintsupplies |Cari LOcken for Silhouette copy



I opened up the Silhouette Mint™ software, uploaded the FREE SHAPE and created my stamp using the image of the middle layer from the FREE design. (The image that was most delicate). In Mint Studio™, open up your design and, if desired, change the Fill Types. Here is where you can play with the thickness, brightness, etc. using the sliding bar on the right side menu.



freeshapestampimage|Cari Locken for SIilhouette copy



Once the design is set, you then send it to Mint (the leaf icon at top right). Click SEND TO MINT and then insert the stamp card through the back of the machine.



sendtomint|Cari Locken for Silhouette copy



You will then add ink to the stamp and let sit for about five minutes until the ink has soaked in.

Once it’s soaked in, you can do a few ‘test’ stamp images on a scrap piece of paper.



addink&wait |Cari Locken for SIlhouette copy



Step Two: Using PixScan™ to Cut the Stamped Image


I wanted to create a long border to place down one side of my photo, so I stamped several images of the snowflake in a row. I then took a picture of the mat (with the piece of paper on it) using my iPhone.  I uploaded the image to my computer.



pixscanmatinsilhouette|Cari LOcken for Silhouette copy



In Silhouette Studio® I opened up the PixScan™ screen and clicked on open up file and searched for my photo. Click on the photo and upload the image.



pixscan1 |Cari Locken for Silhouette copy



As you see from this screen, it will take a bit of time to upload your image.



pixscan2 |Cari Locken for Silhouette copy



When my image appeared, the grid was showing so I removed that in order to see the image better.



pixscan3|Cari Locken for Silhouette copy



You now need to trace the image in order to cut out the stamped design.

pixscan4|Cari Locken for SIlhouette copy



I didn’t want to cut out each snowflake individually because I wanted to have them in a border. So, once the image has been traced I moved away the ‘traced’ part (the red snowflakes—I just deleted them because I didn’t need them).


I then created an offset (cut line around the image) that would allow my stamped snowflakes to be connected. You will notice that last snowflake on the right isn’t connected. I was okay with that because I was going to use it elsewhere on my layout.


Once the image has the offset created, you can now place the PixScan™ mat and your image through the Silhouette CAMEO® and cut it out.



pixscan8|Cari Locken for SIlhouette copy



Here’s the finished cut border design.



cutstampedimage|Cari Locken for Silhouette copy



Here’s what it looks like on my layout. I also added some teal rhinestones to the center of the snowflakes.



snowflakeborder|Cari Locken for Silhouette copy



Step Three: Cut Designs


I then created the rest of the designs for my layout. I used the original FREE SHAPE OF THE WEEK but resized it a bit smaller and cut it from Silhouette Adhesive Backed card stock along with a few other shapes (Snowflake swirls and title).



freeshapepieces|Cari Locken for Silhouette copy



I then began assembling all the pieces onto my layout. Here’s a look at the FREE SHAPE with an added rhinestone in the center.



freeshape0112015 |Cari Locken for Silhouette copy



I used the stamp that I created earlier and stamped in various places on my layout. I used the card base (from the FREE SHAPE) to print my journaling on.



close2snowflake |Cari Locken for SIlhouette copy



Here’s a look at the ‘extra’ snowflake that was cut out on the PixScan™ mat.  I used some foam adhesive to adhere to my page for added dimension.



close1snowflake |Cari Locken for Silhouette copy



I hope I’ve encouraged you to use the FREE SHAPE OF THE WEEK and try out the Silhouette Mint™ Machine. You won’t be disappointed.



sideview1 |Cari Locken for Silhouette copy


Cari Locken

HI there! I’m Cari Locken from Langley, BC, Canada. I’m a wife and mother of 3 amazing kids! I have been crafting since I was a child and love the creative outlet that this hobby brings to me. My formal training is in the area of music as I have a Masters degree in Music and I am currently teaching Band (to Grades 5, 6 & &) as well as private piano lessons. However I always find time to dig out my scrappy supplies and work on a few projects here & there. I love creating scrapbook layouts, preserving the everyday moments and special memories of our family life as well as creating cards & home decor items . Other than scrapbooking I enjoy spending time watching my children play sports, reading, knitting, photography and cooking. I’m thrilled to be a part of the Silhouette Team!

Designs Used:

Products Used:


adhesive cardstock

Mint Ink

Mint Stamp Kit

Silhouette Mint™ Custom Stamp Maker


essentials 12 in. x 12 in. adhesive cardstock 16-pack

Assorted Rhinestones - aqua, teal, mint


Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.


  1. I adore this layout, Cari! And I love the repetition of the snowflake in several layers on the page. Gorgeous! Which Mint ink color is the blue you used?

    1. Thanks Kelly. I used the BLUE.

  2. ILove it:-)

Comments are closed.