Mini Pillows Using Printable Heat Transfer Material
First Cut

Mini Pillows Using Printable Heat Transfer Material

One of the things I love about Silhouette is that they have numerous products to chose from, and for this blog post I wanted to create something with the printable heat transfer material.

This was the very first time I used this product. Don’t get discouraged by the idea of trying something new because if I can make these cute mini pillows on my first try, then you can too.

Supplies Needed:

Step One: Set Up the Design to Be Printed

  1. Open the Page Setup panel and adjust your paper size to 8.5 inches x 11 inches.
  2. Click on the registration marks icon and add your type of registration marks.
  3. Add your design to fit the page. (Tip: If your design has text or if you like the layout just the way it is, you will need to mirror the design so that it can be applied to fabric correctly.)
  4. Once you’re satisfied with your design, send it to your printer to print. (Make sure your design prints on the white side, not the red grid side.)

Step Two: Cut the Design

  1. Load your printable heat transfer material into your machine.

2. Select “Send” located on the top right side of Silhouette Studio®.

3. Make sure you chose “Heat Transfer, Printable (Light Fabrics)” from the material drop-down menu.

4. If you have the Autoblade, it will automatically switch to the correct blade depth.

5. To make sure it cut through, I set the number of passes to 3.

Step Three: Iron on the Design

  1. Peal the extra film off. I started from the left corner of the material, but you can start from any corner.

2. Iron your fabric first to get rid of any wrinkles

3. Place the heat transfer material on top of your fabric with the design facing down. That way you are ironing on the red grids.

The directions on the package say to place another fabric material on top of the red grids but it was taking a bit too long for me so I decided not to use one.

Step Four: Sew the Pillow

I am not an advanced sewer, but I can do the simple basics, and that’s all you need to make this pillow. I just used my scissors to cut around the shape of the hot air balloon. Then used the same shape to cut out another fabric for the backing of the pillow.

Once I sewed the fabrics together, I stuffed the case with some pillow stuffing. Then I took my hot glue gun and glued the white pom pom trim around the pillow.

Of course I had to use my adorable niece as my model. If hot air balloons aren’t your thing, then check out the countless designs in the Silhouette Design Store. Cute little forest animal pillows would be exciting to make as well.

This blog post was contributed by Kathi Arbiso. Follow her for more inspiring Silhouette projects.

Kathi Arbiso

Just your typical California girl here surviving the realities which is life and trying to make pretty things. I've been married for almost 5 years now and have two very funny kids. As a family we enjoy hunting for treasures at flea markets...cause you know what they say, "Teach your kids to love antiques and they'll never have money for drugs."

Designs Used:

hot air balloon

good vibes record

Products Used:

Silhouette Curio™

Silhouette CAMEO® 3

Silhouette Portrait®

printable heat transfer material for light fabrics

Subscribe:

Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.

1 comment

  1. So cute, Kathi! I just used this material for the first time recently, and I need to make another project with it! Love the pillow idea. 🙂

Leave a Reply