How-to: Cut and Apply Vinyl
First Cut

How-to: Cut and Apply Vinyl

With vinyl, you can apply precisely cut designs to almost any surface. Silhouette’s vinyl is available in over twenty-five different colors, two sizes (9-inch and 12-inch widths), and comes in glossy permanent, matte removable, and various specialty finishes.

In this tutorial, we will show how to apply vinyl with transfer tape and something called the hinge method.

Supplies Needed:

Step One: Cut Out Vinyl

  1. Open design in Silhouette Studio® and resize as desired. Select your type of vinyl from the material drop-down list in the Send panel.
  2. Load the vinyl into your Silhouette. A cutting mat is not necessary; however, if your vinyl piece is smaller than what the rollers can adjust to, you will need to use a cutting mat. Click “Send.”
  3. After your image is cut, remove the vinyl from your Silhouette. Weed (peel away) the negative space so all that remains of the vinyl backing is your design. The next step is to get the vinyl onto your project.

Step Two: Apply Vinyl Using Transfer Tape and the Hinge Method

  1. Make sure all of the unnecessary vinyl is removed from your design. 
  2. Cut a piece of transfer tape big enough to cover your entire design.
  3. Remove the backing from your transfer tape. Using a Silhouette scraper, apply the transfer tape to the vinyl. Press it down hard so that it evenly adheres to the transfer tape.
  4. Move your vinyl to your project and place it where you want. Place a piece of tape down the middle of your project. This tape will act as the hinge.
  5. Gently pull up one side of your design. Remove the vinyl from the adhesive backing.
  6. Use scissors to cut away the adhesive backing from that one side.
  7. Press your vinyl onto the surface. Use a scraper to press out any bubbles.
  8. Remove the tape from the middle.
  9. Gently fold back the other side of your design.
  10. Remove the adhesive backing from that side.
  11. Press that side down onto your surface. Use a scraper to adhere it and press out bubbles.
  12. Remove the transfer tape. Be careful to make sure all of the vinyl sticks to your surface.
  13. You perfectly aligned your project.

 

If you have a small design, you don’t need to use the hinge method to apply your vinyl. Simply place your design on your project like a sticker and peel off the transfer tape.

What will you create with vinyl?

Silhouette

Subscribe:

Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.

1 comment

  1. Although I know your tutorial is great for any design, I love your little design. Would you mind sharing the design number to save some search time? Thank you!

Leave a Reply