DIY Craft Bag | Creative Material Tutorial
First Cut

DIY Craft Bag | Creative Material Tutorial

Crafting + rainbows are my two favorite things! So, I combined them into one and created this ah-mazing tote bag using Silhouette fabric inks and stencil vinyl.  Stay a while and let me show you how to make one for yourself!

 

You Will Need:

 

Silhouette fabric inks come in a variety of colors, which means you can pretty much make anything your crafty little brain can think up!

 

 

fabric-ink-12

 

 

I’m always on the hunt for a cute bag to hold my craft supplies and when I can’t find one that strikes my fancy, I just make my own!

 

Let’s get started.

 

Step One: Edit and Cut Stencil Vinyl

 

I always start by playing around with my design in Silhouette Studio®. I like to apply colors so I can really get a good idea of how my final design will look.

 

Once you get your design exactly how you want it:

 

(1) Go to the Cut Settings panel and select your media.

 

Keep in mind that stencil vinyl is different from stencil material: it’s thinner and not reusable. When you’re in the cut settings window you will need to select “Stencil Vinyl” as your media.

 

(3) Set Ratchet blade to 1.

(4) Send to Silhouette

 

 

fabric-ink-7

 

 

fabric-ink-13

 

 

 

Step Two: Create Stencil

Normally, when you’re working with vinyl you remove the negative space, leaving the design in tact. Since we’re creating a stencil we’ll need to remove the design and leave behind the negative space. Make sense?

 

To create the stencil:

 

(1) Use the Hook Tool to remove the letters and shapes. Be mindful of the centers of letters such as A, B, D etc. They like to sneak away with the rest of the letter!

 

 

fabric-ink-14

 

 

(2) Apply the transfer tape to the design and smooth over it really well with your scraper tool.

 

I like to go in all four directions a few times just to make sure I get every crack and crevice! It’s easiest if you start on one end and slowly peel away the backing while smoothing the transfer tape down at the same time.

 

 

fabric-ink-15

 

 

 

Step Three: Apply Stencil to Bag

 

Now you can apply the stencil and transfer tape to your bag!  Repeat Step Two, but this time apply the stencil to your bag.

 

 

fabric-ink-2

 

 

You’ll have to use the Scraper Tool again and a little bit of elbow grease. When you carefully pull away the transfer tape, just the stencil is left behind.

 

 

fabric-ink-3

 

 

 

Step Four: Rainbow-ize with Fabric Paint

 

Time to get rainbow-ized!

 

(1) Grab a sponge brush

NOTE: You can even use a paintbrush for this step, just use a dabbing motion instead of a painting motion so that you aren’t pushing the ink underneath the stencil.

 

 

fabric-ink-8

 

 

(2) dab your colors onto your design however you want. Get crazy with it! 🙂

 

 

fabric-ink-9

 

 

Allow the ink to dry completely before removing the stencil. I know, it’s hard to wait but you’ll thank me later.

 

 

fabric-ink-4

 

 

30 minutes later….

 

 

Step Five: Use Iron to Set Ink

 

Okay, now that your inks are all nice and dry you can peel away that messy stencil and reveal the magic!!!

 

 

fabric-ink-11

 

 

To set your inks and make them permanent:

 

(1) Cover design with a press cloth.

(2) Iron over the design.

NOTE: I left my iron on the cotton setting and it worked perfectly.

 

That’s it! Now you can fill that cute little sucker up with all of your crafty goodies and everyone will want to know where you got your adorable tote bag!

 

 

fabric-ink-6

 

 

Happy crafting!!

 

Designs Used:

Products Used:

New Silhouette CAMEO®

Hook

Scraper

stencil vinyl

fabric ink

Subscribe:

Join our Silhouette community and never miss an update!

We do not give your information to third parties, so your email address is safe with us.

10 comments

  1. So cute! 😀 TFS

  2. Might want to suggest that you add a step of inserting cardboard or something to keep the paint from seeping through the material to the back of the bag 🙂 Really cute project!!!

    1. That’s a great tip, Karen! Thank you!! 🙂

  3. Thank you, Kayla. Very cute. I love tote bags!

    1. Thanks, Trish! Me too, I’m a self labeled bag lady! I have WAY to many! 🙂

  4. can you do a tutorial on the stencil vinyl? i am new, and i am not understanding the the steps. or if there is one out there, point me in the right direction?

    1. Hi Heather! Thank you for the comment. Kayla’s post is focused mainly on showing off what you can do with the fabric inks. This Saturday design team member Kelly W. will be doing a tutorial that focuses more on stencil making using the stencil vinyl. Stay tuned!

  5. Hi Kayla, I actually made almost identical bags for my bridesmaids for my wedding – on one side I stenciled “I love my bridesmaids” and on the other I did their name (in my wedding colours of course!) That way they had something to keep all their stuff in on my wedding day 🙂

    1. That is a fantastic idea!! I bet they were so cute–and how cool that you added that special handmade touch to your wedding! Isn’t fabric ink fun?! 🙂

Comments are closed.