Metal Etched Butterflies – Silhouette America Blog

Metal Etched Butterflies

Metal Etch Tutorial by Kelly Wayment_hi res

How are your Silhouette Curio™ creations coming? Are you ready for another metal etching tutorial? I tried my most recent etching project on a black metal etching sheet, and I love how the exposed silver metal really pops. I’ll show you how I did it.

 

Here is what you’ll need to create this project:

 

1- PREPARE YOUR DESIGN

 

In the Design Page Settings Window, set the Page Size to 7 in. wide and 5 in. high to match your metal etching sheet. Make sure your Cutting Mat is also set to Curio (cut) 8.5 x 6 in.

 

Choose a design you wish to etch. I chose butterfly field.

 

Because the design is a different shape than the metal sheet, I resized it to approximately the correct 7-inch width, then used my knife tool to cut away the bottom portion. (It’s best to make your design is a compound path before slicing. Select the design, right click, choose Make Compound Path.)

  • Click on your Knife tool on the left toolbar.
  • Set it to Straight and Treat Unfilled Shapes as Solid. (Designer Edition and Basic Edition both have these two important options, but Designer Edition has a few more knife features.) Your designs must be closed shapes to use the emboss fill, which is why we chose the Solid option.
  • Click and drag your knife tool across the design to cut off the unneeded portion. (Hold the Shift key while dragging for a perfectly horizontal line.)

Knife Tool DE

 

 

Drag away and delete the extra pieces. Group the remaining design you wish to etch. (See below.)

Knife Tool results

 

 

2- CHOOSE AN EMBOSS EFFECT

 

To etch out the design, choose an Emboss effect. In the Emboss Window, under Emboss/Deboss, choose an Effect. I chose Parallel Lines, reduced my Spacing to 0.010 in. (you can type the numbers in if your slider doesn’t go as small as you wish), and on this design I also adjusted my Angle to 20.8°. (These effect settings are all personal preference, so don’t be afraid to change them to what works for you.)

Metal etch emboss effect

 

 

3- CHOOSE CUT SETTINGS

 

In your Cut Settings Window, set Tool 1 material type to metal etching sheets.

 

You will need to place platforms 2 + 2 + cutting mat onto your base, with the metal etching sheet placed on the mat exactly as you see on your work page, and insert the blue stippling/etching tool into the Curio’s Tool 1 holder (look for the red circle).

 

TIP: You should use a sticky mat, or the metal could slip on your mat while etching.

 

 

4- SEND TO SILHOUETTE

 

Load the base into the Curio, click Send to Silhouette, and watch it etch!

 

TIP: Gently blow away the bits of metal, and if you choose to brush away the metal “burrs” off the finished design, please make sure you don’t rub them against the uncut surface or you might scratch yourself.

 

Add the etched metal piece to a frame and admire your beautiful artwork!

Metal etch butterfly detail

 

 

If you have any metal etching questions, please ask! We’re happy to help. 🙂

Kelly Wayment

Hi! I'm Kelly Wayment and am thrilled to continue on with Silhouette America's design team for a fourth term. I live in Utah with my husband of 17+ years and our four kids ranging from first-grader to teen. I work part-time as an auditor in an accounting firm, but I would always prefer to be crafting. I started scrapbooking and cardmaking in 1999, and that has spread into other crafts over the years. The Silhouette machine has literally changed the course of my life as it has turned my simple hobbies into ways to push the boundaries with my creativity, along with innumerable opportunities to teach and share that joy with others.

Designs Used:

Products Used:

Silhouette Curio™

8.5 in. x 6 in. Silhouette Curio™ mat

Curio Stippling & Etching tool

Curio 5 in. x 7 in. Metal Etching Sheets

Subscibe:

Join 50,000 other subscribers and recieve updates on all the great stuff we are doing!

We Hate SPAM and promise to keep your email address safe!

4 comments

  1. This is beautiful! I really love how it looks on black 🙂

    1. Thanks! I’m a fan of the black, too.

  2. 🙁 I just attempted to do a very similar pattern with the same settings you used here, but my blade just wiggles in a hole in the same spot.

    Any ideas on what I might have done wrong?

    1. Hi Brenda,

      I’m sure you have double checked your settings, but make sure you have a total of 5 mm of platforms. I set my speed at 5 and my thickness at 26. And ensure you are using the etching tool and not the regular blade. I hope this helps!

Comments are closed.